科技生活动态：cisco交换机配置vlan方法

2021-05-29 06:48:38

导读跟大家讲解下有关cisco交换机配置vlan方法，相信小伙伴们对这个话题应该也很关注吧，现在就为小伙伴们说说cisco交换机配置vlan方法，小编也

跟大家讲解下有关cisco交换机配置vlan方法，相信小伙伴们对这个话题应该也很关注吧，现在就为小伙伴们说说cisco交换机配置vlan方法，小编也收集到了有关cisco交换机配置vlan方法的相关资料，希望大家看到了会喜欢。

Cisco IOS中有两种方式创建vlan,在全局模式下使用vlan vlanid命令，如switch(config)#vlan 10; 在vlan database 下创建vlan ，如 switch(vlan)#vlan 20;

交换机配置：

复制代码代码如下:

Switch>enable Switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z Switch(config)#vlan 10 Switch(config-vlan)#name Math Switch(config-vlan)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 20 name Chinese VLAN 20 added: Name: Chinese Switch(vlan)#vlan 30 name Other VLAN 30 added: Name: Other Switch(vlan)#exit APPLY completed. Exiting.... Switch#configure terminal Enter configuration commands, one per line.End with CNTL/Z. Switch(config)#interface fastEthernet 0/1 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10 Switch(config-if)#exit Switch(config)#interface fastEthernet 0/2 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10 Switch(config-if)#exit Switch(config)#interface range fastEthernet 0/3-6 Switch(config-if-range)#switchport mode access Switch(config-if-range)#switchport access vlan 20 Switch(config-if-range)#exit Switch(config)#interface range fastEthernet 0/7-9 Switch(config-if-range)#switchport mode access Switch(config-if-range)#switchport access vlan 30 Switch(config-if-range)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console Switch#show vlan VLAN Name StatusPorts ---- -------------------------------- --------- ------------------------------- 1defaultactiveFa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Fa0/24 10 Math activeFa0/1, Fa0/2 20 ChineseactiveFa0/3, Fa0/4, Fa0/5, Fa0/6 30 OtheractiveFa0/7, Fa0/8, Fa0/9 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-defaultact/unsup 1005 trnet-defaultact/unsup VLAN TypeSAID MTU Parent RingNo BridgeNo StpBrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1enet100001 1500-----00 10 enet100010 1500-----00 20 enet100020 1500-----00 30 enet100030 1500-----00 1002 fddi101002 1500-----00 1003 tr101003 1500-----00 1004 fdnet 101004 1500---ieee -00 1005 trnet 101005 1500---ibm-00 Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary TypePorts ------- --------- ----------------- ------------------------------------------ Switch# //为VLAN配置ip地址（就是默认网关） Switch(config)#interface vlan 10 Switch(config-if)# %LINK-5-CHANGED: Interface Vlan10, changed state to up Switch(config-if)#ip address 192.168.1.1 255.255.255.0 Switch(config-if)#no shutdown Switch(config-if)#exit Switch(config)#interface vlan 20 Switch(config-if)# %LINK-5-CHANGED: Interface Vlan20, changed state to up Switch(config-if)#ip address 192.168.2.1 255.255.255.0 Switch(config-if)#no shutdown Switch(config-if)#exit Switch(config)#interface vlan 30 Switch(config-if)# %LINK-5-CHANGED: Interface Vlan30, changed state to up Switch(config-if)#ip address 192.168.3.1 255.255.255.0 Switch(config-if)#no shutdown Switch(config-if)#exit

PC设置：